Technical data
SINAUT TD7 software package for the CPU
2.5 Data point typicals
Software
System Manual, 07/2009, C79000-G8976-C222-07
235
Range of
values:
as 32-bit binary number
2#0 ... 2#11111111_11111111_11111111_11111111
As 32-bit binary number
DW#16#0 ... DW#16#FFFF_FFFF
No parameter specified: Default value 0 (2#0) is valid.
A 1 must be entered in the bit pattern that the position of each input to be
inverted; 0 is entered for the other inputs. The assignment of the 32 inputs of
the parameters InputByte_1 through InputByte_4 to the 32 bits in the bit
pattern of the InversionMask parameter is shown in the following table.
The inversion of input signals can, for example, be useful when using a
mixture of sensors operating on the open and closed circuit principle.
InputByte_1 InputByte_2 InputByte_3 InputByte_4
Bit
.7
.6
.5
.4
.3
.2 .1
.0
.7
.6
.5 .4 .3 .2 .1 .0 .7 .6 .5 .4 .3 .2 .1 .0
.7
.6
.5
.4 .3 .2 .1 .0
2#
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
DW#16#
_
_
_
_
_
_
_
_
2.5.3 ST7 binary information typical FB Bin04B_R
Function
Receive 4 bytes of status/binary information
Explanation of the parameters
Names: PartmerNo
PartmerObjectNo
Enabled
Refer to
Parameters you require often (Page 223).
Name: OutputByte_1 … _4
Declaration: OUTPUT
Data type BYTE
Default: 0 (B#16#0)
Explanation Output byte