Technical data

SINAUT TD7 software package for the CPU
2.5 Data point typicals
Software
232 System Manual, 07/2009, C79000-G8976-C222-07
TimeStamp
Name: TimeStamp
Declaration: INPUT
Data type BOOL
Default: FALSE
Explanation Time stamp
Range of values: TRUE or FALSE
Here, you specify whether the message is transferred with the time stamp.
This is only possible if the time provided by the local TIM is available on the
PLC. For more detailed information, refer to the description of FC TimeTask.
If no parameter is specified, the default is FALSE; in other words, data is
transmitted without a time stamp.
The following data point typicals use the parameter:
Bin04B_S, Ana04W_S, Cnt01D_S/Cnt04D_S, Dat12D_S, Set01W_R,
Par12D_R
Note
With FB-Ana04W_S, remember that the "Timestamp" parameter depends on
the "MeanValueGeneration" parameter (see
ST7 analog value typical FB
Ana04W_S (Page
236)).
NewData
Name: NewData
Declaration: OUTPUT
Data type BOOL
Default: FALSE
Explanation Receive new data.
Range of
values:
Output
Bit memory
Data bit
Q 0.0 ... Q n.7
M 0.0 ... M n.7
L 0.0 ... L n.7
DBm.DBX 0.0 ... n.7