Technical data

SINAUT TD7 software package for the CPU
2.5 Data point typicals
Software
230 System Manual, 07/2009, C79000-G8976-C222-07
You need to specify whether or not the message will be transmitted
according to the image memory principle or the send buffer principle.
The image memory method reduces the memory required for storing
messages on the TIM and produces as little message traffic on the WAN as
possible. The default TRUE was selected because the image memory
principle is the best choice in practice for most data transmissions.
In general, as the user you only need to change the default setting of the
image memory parameter with a few objects, namely objects whose data
changes must be stored on the TIM and sent to the partner singly, for
example alarms with time stamp.
The parameter is used by the following process typicals:
Bin04B_S, Ana04W_S, Cnt01D_S/Cnt04D_S, Set01W_R, Par12D_R,
Dat12D_S
Conditional
Name: Conditional
Declaration: INPUT
Data type BOOL
Default: TRUE
Explanation Conditional spontaneous data transmission
TRUE or FALSE
Bit memory
Data bit
M 0.0 ... M n.7
L 0.0 ... L n.7
DBm.DBX 0.0 ... n.7
Range of
values:
No parameter specified: Default value TRUE is valid.
You will find information on the parameter assignment in the Unconditional
parameter.
The parameter is used by the following process typicals:
Bin04B_S, Ana04W_S, Cnt01D_S/Cnt04D_S, Set01W_R, Par12D_R,
Dat12D_S
Unconditional
Name: Unconditional
Declaration: INPUT
Data type BOOL
Default: FALSE
Explanation Unconditional spontaneous data transmission.
TRUE or FALSE Range of
values:
Bit memory
Data bit
M 0.0 ... M n.7
L 0.0 ... L n.7
DBm.DBX 0.0 ... n.7