Technical data

SINAUT TD7 software package for the CPU
2.5 Data point typicals
Software
System Manual, 07/2009, C79000-G8976-C222-07
229
• Processing of process typicals not enabled
(Bin04B_S, Ana04W_S, Cnt01D_S/Cnt04D_S, Set01W_R, Par12D_R,
Dat12D_S)
If processing is not enabled, the FB can only communicate at the
organizational level; in other words, ORG messages can be sent and
received. A query is, for example, answered, however the reply message
contains the data valid at the time the function was disabled.
Note
The response described here does not apply to Cmd01B_R (see
ST7
command typical FB Cmd01B_R (Page
255))!
• Processing of operator typicals not enabled
(Bin04B_R, Ana04W_R, Cnt01D_R/Cnt04D_R, Set01W_S, Par12D_S,
Dat12D_R)
If processing is not enabled, the FB can only communicate at the
organizational level; in other words, ORG messages can be sent and
received. A request can, for example, still be sent and the answer
received, the received information is, however, not output to the outputs.
You will find the relevant outputs under "Enable" in the description of the
individual data point typicals.
Note
The response described here does not apply to Cmd01B_S (see
ST7
command typical FB Cmd01B_S (Page
253))!
ImageMemory
Name: ImageMemory
Declaration: INPUT
Data type BOOL
Default: TRUE
Explanation Image memory principle for spontaneous data transmission
TRUE or FALSE
Bit memory
Data bit
M 0.0 ... M n.7
L 0.0 ... L n.7
DBm.DBX 0.0 ... n.7
Range of
values:
No parameter specified: Default value TRUE is valid.