Technical data

SINAUT TD7 software package for the CPU
2.5 Data point typicals
Software
System Manual, 07/2009, C79000-G8976-C222-07
221
Overview of the available data point typicals
The following table provides an overview of the currently available data point typicals for data
exchange between two SINAUT ST7 subscribers.
Table 2- 4 Overview of the available data point typicals
SINAUT protocol Symbolic
FB name
Explanation
Message typicals
Bin04B_S ST7 status message object, send 4 bytes of
status/binary information
ST7
Bin04B_R ST7 status message object, receive 4 bytes of
status/binary information
Analog value typicals
Ana04W_S ST7 analog value object, send 4 analog values (16-bit
value in the INT format)
ST7
Ana04W_R ST7 analog value object, receive 4 analog values (16-
bit value in the INT format)
Counted value typicals
Cnt01D_S ST7 counted value object, send 1 counted value (32-bit
ST1 format)
Cnt01D_R ST7 counted value object, receive 1 counted value (32-
bit ST1 format)
Cnt04D_S ST7 counted value object, send 4 counted values (32-
bit ST1 format)
ST7
Cnt04D_R ST7 counted value object, receive 4 counted values
(32-bit ST1 format)
Command typicals
Cmd01B_S ST7 command object, send 1 byte commands (1-out-
of-8 ST1 format)
ST7
Cmd01B_R ST7 command object, receive 1 byte commands (1-
out-of-8 ST1 format)
Setpoint/parameter typicals
Set01W_S ST7 setpoint object, receive 1 setpoint (16 bits) and
receive current local setpoint
Set01W_R ST7 setpoint object, receive 1 setpoint (16 bits) and
send current local setpoint
Par12D_S ST7 parameter object, send max. 12 double words with
parameters and receive current local parameters.
ST7
Par12D_R ST7 parameter object, receive max. 12 double words
with parameters and send current local parameters.
Other data typicals
Dat12D_S ST7 data object, send max. 12 double words with any
information.
ST7
Dat12D_R ST7 data object, receive max. 12 double words with
any information.