Technical data

SINAUT TD7 software package for the CPU
2.4 Basic blocks
Software
System Manual, 07/2009, C79000-G8976-C222-07
219
2.4.10 FC Create
Auxiliary block for putting together messages and entering them in one or more relevant
send buffers. This block is required by the data point typicals for data and organizational
messages and by FC BasicTask only for organizational messages.
This block is required in every CPU.
In a normally configured SINAUT installation, FC Create is automatically available in the
block directory of the CPU. This happens as soon as you save in the SINAUT configuration
tool ’Subscriber Administration’ and the option for compiling the 'SINAUT TD7 Blocks for the
CPUs' is marked as active.
2.4.11 FC Distribute
Auxiliary block for distributing messages from the receive buffer to the appropriate data point
typicals or to the subscriber objects in the subscriber records.
This block is required in every CPU.
In a normally configured SINAUT installation, FC Distribute is automatically available in the
block directory of the CPU. This happens as soon as you save in the SINAUT configuration
tool ’Subscriber Administration’ and the option for compiling the 'SINAUT TD7 Blocks for the
CPUs' is marked as active.
2.4.12 FC Search
Auxiliary block for searching:
● For the initial address of a subscriber object within the subscriber records
● For the local object no. (instance DB) from one of the two object reference lists for a
received message with an incomplete destination address
This auxiliary block is required by almost all blocks. This block is required in every CPU.
In a normally configured SINAUT installation, FC Search is automatically available in the
block directory of the CPU. This happens as soon as you save in the SINAUT configuration
tool ’Subscriber Administration’ and the option for compiling the 'SINAUT TD7 Blocks for the
CPUs' is marked as active.
2.4.13 FC Diagnose
Auxiliary block for entering SINAUT system messages in the diagnostic buffer of the CPU.
This block is required in every CPU.
In a normally configured SINAUT installation, FC Diagnose is automatically available in the
block directory of the CPU. This happens as soon as you save in the SINAUT configuration
tool ’Subscriber Administration’ and the option for compiling the 'SINAUT TD7 Blocks for the
CPUs' is marked as active.