Technical data

SINAUT TD7 software package for the CPU
2.1 Overview
Software
196 System Manual, 07/2009, C79000-G8976-C222-07
When the save is completed, the SINAUT-specific data has been adapted to the local
situation in all CPUs and the SDBs of the CPUs once again have the correct content.
2.1.5 Using online help
Introduction
This chapter 'SINAUT TD7 software package for the CPU' is available on the PG as a help
file. You can therefore call up this chapter online. The following sections describe how to call
up the online help.
Starting the online help from the SINAUT TD7 library
To start the online help from the SINAUT TD7 library simply select a block in the ’Blocks’
directory, for example, FB82. Then press the F1 key. The description of the selected block is
displayed immediately.
Figure 2-14 Starting the online help from the SINAUT TD7 library
Starting the online help from the block directory of the user program
Just as in the SINAUT TD7 library, you can start the online help from the block directory of
the user program as follows: Select the required block, and then press the F1 key.