Technical data

SINAUT TD7 software package for the CPU
2.1 Overview
Software
188 System Manual, 07/2009, C79000-G8976-C222-07
Initial situation
You have configured your SINAUT installation as already described in the section
'Configuration software for SINAUT ST7'; in other words, you have completed the connection
configuration with the appropriate SINAUT configuration tool and have started to save in the
'Subscriber Administration' SINAUT tool. The result is that all the necessary SINAUT blocks
already exist in all the program directories of the CPU in addition to the SDB directory and
OB1 as shown in the following figure.
Figure 2-8 Example of a project (SINAUT basic blocks already present)
Making the change
Copy the additional blocks that you require directly from the TD7 library to the program
directory of the relevant CPU. If the number of one of the copied blocks is identical to an
existing block, a dialog is displayed automatically indicating the number conflict. You will be
asked whether or not you want to remain the block. After clicking on
Rename... , a further
dialog appears in which you can enter the new number, for example FB82 is renamed to
FB8 as shown in the following figure.