Technical data

SINAUT TD7 software package for the CPU
2.1 Overview
Software
System Manual, 07/2009, C79000-G8976-C222-07
181
2.1.1 SINAUT TD7 Library
Introduction
When you install the SINAUT software, a library is also created with the SINAUT TD7
software package. This is access in the same way as all other libraries in STEP 7; in other
words, from the SIMATIC Manager, you can display a list of available libraries with the
Open
menu in the
Libraries tab. The SINAUT library is located there under the name SINAUT TD7
Library
.
Figure 2-3 Opening the SINAUT library SINAUT TD7 Library
Structure of the library
SINAUT TD7 Library contains the directory Basic01 that is made up of the following sections:
● Source
Contains the two STL source files Basic01_Source_de (blocks with German mnemonics)
and Basic01_Source_en (blocks with English mnemonics). This contains all the blocks of
the TD7 library in STL source format.
● Blocks
contains all the blocks of the TD7 library in block format. This contains all the SINAUT
blocks of the type FB, FC, DB, UDT and VAT and the SIMATIC system blocks SFC and
SFB that are used by the SINAUT software.