Technical data

Configuration software for SINAUT ST7
1.11 Saving and generating system data
Software
168 System Manual, 07/2009, C79000-G8976-C222-07
● TIM modules
● Third-party stations
The comments are visible in the SIMATIC Manager when you select the
View / Details
menu. The TIM modules are visible after expanding the tree structure and selecting a
station.
Note
Creating the subscriber number when generating the system data overwrites comments
previously entered in the network configuration without any possibility of restoring them.
1.11.5 Consistency check
The consistency check is always started automatically before you use the generate/compile
functions in subscriber administration to prevent SDBs or DBs being created with
inconsistent data.
The consistency check can also be started as a separate function using the
SINAUT / Check
consistency...
menu in subscriber administration.
Errors detected during the consistency check are displayed to the user in an error list.
Figure 1-80 Example of an error list after running the consistency check
If inconsistent connections are found, the error list indicates that cause will be diagnosed in
the connection configuration in the
Invalid connections dialog.
After eliminating an error, you must save prior to the next consistency check otherwise be
eliminated error will still be reported.
For more information on SINAUT ST1, refer to release 05/2007 of the manual.