Technical data

Configuration software for SINAUT ST7
1.10 TD7onTIM software package
Software
162 System Manual, 07/2009, C79000-G8976-C222-07
Initial setting of the time
The user program that reads out the time on the CPU should only do this when the validity
bit is set. This is the case as soon as the TIM is synchronized the first time, either by the time
master in the SINAUT network or by the PG.
Note
If the time on the TIM was set from a PG, this is always indicated as standard time (status
bit 1 has the value "0").