Technical data

Configuration software for SINAUT ST7
1.10 TD7onTIM software package
Software
System Manual, 07/2009, C79000-G8976-C222-07
157
parameter of the partner object Set01W_R ) does not cause an interlock with local
setpoint assignment.
After the local or the partner CPU has started up or after the return of the connection, a
general request makes sure that the current valid status of the partner is indicated in
LocalOperation
.
If you do not require the parameter, leave it inactive.
This channel type has no specific parameters.
● Channel name:
ReturnedSetpoint - returned setpoint
(channel type:
Data receive ):
In TD7onTIM, the partner object receiving the setpoint reports back the currently valid
local setpoint when the
LocalSetpointInput channel is set there. This returned value is
displayed at the
ReturnedSetpoint output. If the partner object is set to 'local' and if a new
entry is made there, the setpoint changed there is indicated at
ReturnedSetpoint if the
Local channel is set on the partner object.
After the local or partner CPU has started up or after return of the connection, an
automatic general request makes sure that the currently valid local setpoint is indicated at
ReturnedSetpoint .
If you do not require the parameter, leave it inactive.
This channel type has no specific parameters.
● Channel name:
SetpointInput - Setpoint input
(channel type:
Setpoint send ):
The setpoint to be sent to the partner object is entered over this channel.
This channel type has no specific parameters.
Object type Set01W_R , the setpoint object for the receive direction
The object type Set01W_R receives 1 setpoint. The object also has an input over which the
locally valid setpoint can be returned.
● Channel name:
Local - Setpoint assignment 'local'
(Channel type:
Message send ):
The information as to whether the locally set setpoint or the remote setpoint is valid can
be signaled over this input. The current status of the
Local input and a copy of the current
local setpoint is returned (mirrored) to the partner. A setpoint sent by the remote partner
(for example, master station) can also be accepted when
Local is set.
In contrast to TD7onCPU, the
Local cannel here is only for information. An interlock with
the remote setpoint assignment must be implemented in the user program.
If you do not require the parameter, leave it inactive.
This channel type has no specific parameters.
● Channel name:
LocalSetpointInput - Local setpoint input
(channel type:
Data send ):
A locally active setpoint can be returned over the
LocalSetpointInput input to the send
block.
If you do not require the parameter, leave it inactive.
This channel type has no specific parameters.