Technical data

Configuration software for SINAUT ST7
1.10 TD7onTIM software package
Software
System Manual, 07/2009, C79000-G8976-C222-07
153
Object type Dat12D_S
● Channel type: Data send :
With the channel type
Data send , a data field of a maximum of 12 double words can be
sent. This setting is made with the
Number parameter in the Input address area.
Figure 1-77 Section of the parameter assignment dialog of the channel type Data send with the
Number parameter
Name: Number
Range of
values:
1 ... 12
Default: 12
Explanation: The parameter decides the size of the data field in double words. This
allows the message length to be reduced to the length actually required.
This saves transmission time.
Object type Dat12D_R
● Channel type: Data receive :
With the channel type
Data receive , a data field of a maximum of 12 double words can be
received. This setting is made with the
Number parameter in the Output address area.
Name: Number
Range of
values:
1 ... 12
Default: 12
Explanation: The parameter specifies the size of the data field in double words that must
be identical to the data field size of the sending partner object
Dat12D_S .
Object type Mean04W_S
● Channel type: Mean value receive :
This channel type has no specific parameters. The duration of the interval for forming an
individual mean value is determined by the
Time trigger specified for the Mean value
send
channel.
If the mean value is to be entered in an archive in the control center, the
Mean04W_S
object should be transmitted according to the send buffer principle.