Technical data

Configuration software for SINAUT ST7
1.10 TD7onTIM software package
Software
System Manual, 07/2009, C79000-G8976-C222-07
151
Default: 00 (hex)
Explanation: Masked bits in the byte of the
Binary send channel are ignored when
changes are checked. This means that changes to the masked bits for this
channel do not trigger message transmission. A masked bit always has the
value 0 in the message.
The corresponding bits are masked in hexadecimal format.
The bits are masked as shown in the following example in which the hexadecimal value
A3
is entered in the input field of the parameter assignment dialog. The bits with the value 1 are
masked; in other words bits no. 0, 1, 5 and 7 cause the relevant function in the described
masks.
Byte assignment
Bit: .7 .6 .5 .4 .3 .2 .1 .0
Masked 1 0 1 0 0 0 1 1
Hex mask A 3
Object type Bin04B_R
● Channel type: Binary receive :
This channel type has no specific parameters.
Object type Ana04W_S
● Channel type: Analog send :
The following parameters are available in the
Processing parameters area:
Name: Unipolar analog value
Range of
values:
Function active, function deactivated
Default: Function active
Explanation: If the function is activated, negative analog values are corrected to the
value zero.
The error ID 8000h (-32768), that is displayed, for example, if there is a
wire break in
life zero inputs, is nevertheless transmitted.
Name: Smoothing factor
Range of
values:
1 = none, 4 = weak, 32 = medium, 64 = strong
Default: 1