Technical data

Configuration software for SINAUT ST7
1.10 TD7onTIM software package
Software
System Manual, 07/2009, C79000-G8976-C222-07
147
Note
The send trigger can be set individually for each channel. If an object has more than one
channel, remember that the activation of the send trigger of one of the object channels will
transmit
all channels of the data object.
Since the various options of the send trigger must be activated alternatively or additionally
with most channel types, the parameter setting should selected to produce practical results.
Name: Send at change of
Range of
values:
In general: 0 ... 32767
Channel type
Command send (object Cmd01B_S ): 0 or 1
Channel type
Data send (object Dat12D_S ): 0 or 1
Channel type
Setpoint send (object Set01W_S or Par12D_S ) 0 or 1
Defaults: - for binary value, counted value, data and command channels: 1
- For mean value and setpoint channels: 0
- For analog value channels: 270 (1% of the raw value of S7 analog
input modules, 27648 = 100%)
Explanation: The value must be entered (as an integer) in the input field by which the
process value must change so that it is transferred again.
If you enter 0 (zero), the function is deactivated.
The
Time trigger area provides two alternatives Time of day or Time scheme . A combination
of both is not possible.
The
time trigger send trigger is activated with the Active option.
Name: Time of day
Range of
values:
Time of day (hour and minute)
Default: Function not active
Explanation: If the send trigger is triggered by a time of day, the data is read out at the
selected time of day and a message is sent.
Name: Time scheme
Range of
values:
Time scheme (hour, minute or second)
Default: Function not active with the exception of
Mean value send ( Mean04W_S ): Function active, time scheme: 15 minutes
Explanation: If the send trigger is triggered by a time scheme, the data is read out at the
selected time interval and a message is sent.
If the
time trigger is, for example, initially set to time of day and then to time scheme , the
previously set times are replaced by dashes (- - -).