Technical data

Configuration software for SINAUT ST7
1.10 TD7onTIM software package
Software
System Manual, 07/2009, C79000-G8976-C222-07
145
3. Select a different channel of the same object or the channel of another data object of the
same type.
4. Insert the channel with its parameters using the
Paste context menu (right mouse button).
The selected channel is overwritten by the channel and its parameters.
Note
When you copy channels, the channel you are copying is not added to the existing
channels since the number of channels is fixed per data object. The channel selected
prior to paste is overwritten by the copied channel and its parameters.
1.10.10 Mandatory parameters of the send channels
During the parameter assignment of each send channel, you must first set the mandatory
parameters
Input address and Send trigger .
Figure 1-74 Parameter assignment dialog of a send channel based on the example of Counted value
send