Technical data

Configuration software for SINAUT ST7
1.10 TD7onTIM software package
Software
144 System Manual, 07/2009, C79000-G8976-C222-07
Figure 1-73 Selected object Bin04B_R with Binary receive channel selected in the list box and its
parameter assignment dialog
Activating channels
Prior to parameter assignment, the send and receive channels are not yet active, the input
boxes in the dialog are disabled.
Each required channel must be enabled in its parameter assignment dialog using the
Channel active option.
If certain channels of a data object are not required, they can be ignored.
If users are not sure whether they actually require a channel that has already had
parameters set, or when they want to disable a channel later (perhaps temporarily), they can
deactivate each individual channel here without losing the parameter settings.
Copying channels
To simplify parameter assignment, channels along with their parameter assignment can be
copied. If a data object requires more than one channel with the same parameter
assignment (except for the input or output address) and if the parameter settings have been
completed for one channel, this channel along with its parameters can be copied.
Follow the steps outlined below:
1. Select a channel in the list box.
2. Select
Copy in the context menu (right mouse button).