Technical data

Configuration software for SINAUT ST7
1.10 TD7onTIM software package
Software
System Manual, 07/2009, C79000-G8976-C222-07
143
setpoint and parameter objects, all data objects have one or more channels of the same
type.
The channel types differ in the transmission direction relative to the communication partner
and fall into the two classes
Send and Receive channels:
● Send channels for the
send data function:
– Binary send
– Analog send
– Data send
– Mean value send
– Counted value send
– Command send
– Setpoint send
● Receive channels for the
receive data function:
– Binary receive
– Analog receive
– Data receive
– Mean value receive
– Counted value receive
– Command receive
– Setpoint receive
Dialogs for setting channel parameters
To set the parameters for the channels, you select the data object of a TIM with TD7onTIM
in the directory tree. The list box displays the channels of this object with the channel name
and channel type. If channels have already had parameters set, the input or output address
is displayed in the list.
Below the list box, there is a parameter assignment dialog for the channel selected
automatically or with the mouse in the list box.