Technical data

Configuration software for SINAUT ST7
1.10 TD7onTIM software package
Software
System Manual, 07/2009, C79000-G8976-C222-07
139
Parameters in the Object area
Name: Object no.
Range of
values:
1 ... 32000
Explanation: The source object number of this TIM module is set in the input box. The
configuration tool proposes a consecutive number that can be modified. An
inconsistent duplicate assignment of numbers is prevented.
Parameters in the Partner area
The Available partners list box shows all the partners configured for the TIM along with their
subscriber numbers and station names. The communication partners for the relevant data
object are selected from this list and added to the
Selected partners list.
Note
All partners from which data of the object is received or to which it is sent must be added to
the
Selected partners list. If no partner is entered in the Selected partners list, the object is
not processed.
Name: Selected partners
Explanation: The
Selected partners list displays the communication partners for the
relevant data object. These are selected from the
Available partners list
box.
Partners are entered in the
Selected partners list by selecting one or more
(using the Ctrl key) partners in the
Available partners list and clicking on
the button with the arrow pointing to the right. The selected partners are
then entered in the
Selected partners list. The button with the double arrow
is is used to enter all available partners.
Partners are removed from the
Selected partners list using the button with
the arrow pointing left.
Up to 15 partners can be configured per data object.
Name: Partner object no.
Range of
values:
0 ... 32000