Technical data

Configuration software for SINAUT ST7
1.10 TD7onTIM software package
Software
138 System Manual, 07/2009, C79000-G8976-C222-07
1.10.8 Basic parameters of the data objects
The parameters for data objects are set in two phases:
1. Setting of the basic parameters of the data objects (for example partners to which the
data of the object is sent or from which it is received)
2. Setting of the channel-specific properties for the individual send and receive channels
This section first describes setting the basic parameters of the data objects.
Follow the steps outlined below:
1. Select a TIM with TD7onTIM in the directory tree.
2. Select the required data object in the list box. The corresponding parameter assignment
dialog opens.
3. You set the parameters in this dialog.
Figure 1-72 Subscriber administration with the parameter assignment dialog of the basic
parameters of a data object