Technical data

Configuration software for SINAUT ST7
1.10 TD7onTIM software package
Software
132 System Manual, 07/2009, C79000-G8976-C222-07
Copying objects to other TIMs
Once all the SINAUT objects for a TIM have been configured and have had then parameters
assigned, you can copy the objects and the parameter assignments to another TIM in the
project that requires the same or similar objects.
Follow the steps outlined below:
1. Select the objects in the list box while pressing the Shift key and then press the arrow up
or down key or select the objects while pressing the Ctrl key.
2. Select
Copy in the context menu (right mouse button).
3. Select another TIM in the
TIMs with TD7onTIM directory.
4. Add the selected objects to this TIM with
Paste in the context menu.
The objects along with their entire parameter assignment are adopted by the TD7onTIM of
the other TIM. In the copied object and its channels, it may be necessary to adapt the
subscriber-specific parameter assignment (for example the input and output addresses).
If the complete parameter assignment of TD7onTIM is required for other TIM modules, you
can also transfer the entire SINAUT objects to a different TIM. Follow the steps outlined
below:
1. Select a TIM in the
TIMs with TD7onTIM directory.
2. Select
Copy in the context menu (right mouse button).
3. Select another TIM in the
TIMs with TD7onTIM directory.
4. Add all objects to the other TIM with
Paste in the context menu.