Technical data

Configuration software for SINAUT ST7
1.10 TD7onTIM software package
Software
130 System Manual, 07/2009, C79000-G8976-C222-07
Overview of the SINAUT objects
The following data objects are available for TD7onTIM:
Table 1- 5 Overview of the SINAUT objects for TD7onTIM
Object type Name Explanation
System objects
System object WatchDog Monitoring of the CPU-TIM connection
System object PartnerStatus Displays connection status for up to 8 SINAUT
subscribers
System object OpInputMonitor Signals detection of hardware entries
Message objects
Message object for send
direction
Bin04B_S Send 4 bytes of messages/binary information
Message object for
receive direction
Bin04B_R Receive 4 bytes of messages/binary information
Analog value / mean value objects
Analog value object for
send direction
Ana04W_S Send 4 analog values (16-bit value in the INT format)
Analog value object for
receive direction
Ana04W_R Receive 4 analog values (16-bit value in the INT
format)
Mean value object for
send direction
Mean04W_S Send 4 mean values (16-bit value in the INT format)
Mean value object for
receive direction
Mean04W_R Receive 4 mean values (16-bit value in the INT
format)
Counted value objects
Counted value object for
send direction
Cnt01D_S Send 1 counted value (32-bit SINAUT format).
Counted value object for
receive direction
Cnt01D_R Receive 1 counted value (32-bit SINAUT format)
Counted value object for
send direction
Cnt04D_S Send 4 counted values (32-bit SINAUT format)
Counted value object for
receive direction
Cnt04D_R Receive 4 counted values (32-bit SINAUT format)
Command objects
Command object for
send direction
Cmd01B_S Send 1 byte commands (1-out-of-8 SINAUT format)
Command object for
receive direction
Cmd01B_R Receive 1 byte commands (1-out-of-8 SINAUT
format)
Setpoint/parameter objects
Setpoint object for send
direction
Set01W_S Send 1 setpoint (16 bits), object with 3 channels :
- operating mode status local
- returned value
- setpoint entry
Setpoint object for
receive direction
Set01W_R Receive 1 setpoint (16 bits), object with 3 channels :
- operating mode
local
- local setpoint entry
- setpoint output