Technical data

Configuration software for SINAUT ST7
1.10 TD7onTIM software package
Software
126 System Manual, 07/2009, C79000-G8976-C222-07
Copying basic settings to other TIMs
Once the basic settings of a subscriber with TD7onTIM have been made, the settings can
also be transferred to other TIMs that require the same parameters. Follow the steps
outlined below:
1. Select a TIM for which you have already set the parameters in the list box.
2. Select
Copy in the context menu (right mouse button).
3. Select a second TIM.
4. Transfer the parameters to this second TIM using
Paste in the context menu.
1.10.5 Subscriber-specific parameters of TD7onTIM
Each TIM with TD7onTIM can exchange data with one or more partners, known as
destination subscribers. Which subscribers in the project are suitable as destination
subscribers depends on the connection configuration. Here, you specify which TIM with
TD7onTIM will have a connection with which SINAUT subscriber in the network.
Several settings are required for each of the possible destination subscribers that apply to
data traffic between the TD7onTIM of a project and this subscriber, for example whether the
subscriber expects data messages with a time stamp.
To set the parameters specific to destination subscribers, open the
TD7 on TIM directory and
select the
All Destination Subscribers directory. The list displays all potential destination
subscribers of the TD7-compliant TIM modules. These are:
● SIMATIC S7 CPU modules
● SINAUT ST7cc/sc control centers
Below the list box, the parameter assignment dialog of the destination subscriber (selected
automatically or with the mouse) opens.