Technical data

Configuration software for SINAUT ST7
1.10 TD7onTIM software package
Software
122 System Manual, 07/2009, C79000-G8976-C222-07
The parameter assignment windows
In the parameter assignment windows below the list box, you set the parameters for the
TD7onTIM -relevant subscribers, objects and channels. Depending on what is selected in the
directory tree or in the list box, the following dialogs are displayed:
● Parameter assignment dialog of the basic parameters for a TD7-compliant TIM
● Parameter assignment dialog of a destination subscriber
● Parameter assignment dialog of a system or data object
● Parameter assignment dialog of a send or receive channel
– Send channels are displayed with an outgoing arrow.
– Receive channels are displayed with an incoming arrow.
To open a parameter assignment dialog, select the relevant subscriber, object or channel in
the
list box .
If a subscriber or object is selected in the
directory tree , the parameter assignment dialog of
the first object of the subscriber or the first channel of the data object is displayed.
Parameter entries
To simplify data entry, the parameter assignment dialogs are not opened or closed using
separate buttons or menus but are displayed automatically when a subscriber, object or
channel is selected with the mouse in the list box above.
The entries in the parameter assignment dialogs are not applied using a separate button, but
immediately:
● When you activate or deactivate an option
● After entering data when you exit the input box with the mouse or tab key
The entries are applied permanently using the
Save function.
1.10.4 Basic settings for TIM subscribers with TD7onTIM
To make the basic settings for the TD7 software of the individual TIM subscribers, you first
select the
TIMs with TD7onTIM directory in the directory tree. The list box then displays all
the TD7-compliant TIM modules of the project.
Below the list box, the parameter assignment dialog appears for the TIM selected either
automatically or with the mouse.