Technical data

Configuration software for SINAUT ST7
1.9 Subscriber administration in the SINAUT configuration tool
Software
110 System Manual, 07/2009, C79000-G8976-C222-07
● Message is disabled option:
If message output is activated, this option must be deselected (no check mark).
●
Send SMS message :
The list box indicates whether the message is sent on an event entering state (coming) or
an event leaving state (going).
1.9.11 "MSC Station List"
Requirement for configuring the MSC subscribers
Before you configure the MSC subscribers in the properties dialog of the MSC master, you
have already performed the steps listed below:
● Networking of the interface of the TIM module and assignment of the network node type
MSC master, MSC node station or MSC station
● Configuring Internet providers
You will find an configuration overview of "simple Internet communication" in the section
GPRS / Internet communication: Overview of configuration (Page 15).