Technical data

Configuration software for SINAUT ST7
1.9 Subscriber administration in the SINAUT configuration tool
Software
System Manual, 07/2009, C79000-G8976-C222-07
109
All other special characters are blocked.
The function is activated in the subscriber administration in the
Extras / Options menu.
If you select a message in the
SMS Configuration tab and click on the Edit button, the SMS
Message data
dialog opens. You configure an SMS message in this dialog.
Figure 1-59 SMS Message data dialog
The configuration options are available:
●
Text :
The message text of the SMS message is entered in the
Text input box. 120 characters
can be entered.
●
Insert replacement string :
With this list box, you can insert replacement strings as keywords in the text of the SMS.
The following replacement strings can be inserted in the text:
– CPU short name ($CPUNAM$):
The CPU short name is configured in the
SMS CPU configuration dialog
– DB short name ($DBNAME$):
The DB short name is configured in the
SMS DB data dialog
– Message no. ($SMS$):
The message number is a unique number per CPU that is assigned by the SINAUT
configuration tool. It can be seen in the tree display of the
SMS messages list of the
Properties of subscriber dialog.
The replacement strings are replaced by the actual values when the SMS is generated.
By specifying the 3 strings, every SMS message in an S7 project can be uniquely
identified.
●
Request acknowledgment option:
You can specify whether or not an acknowledgment is required for this message.