Technical data

Configuration software for SINAUT ST7

1.9 Subscriber administration in the SINAUT configuration tool

Software

102 System Manual, 07/2009, C79000-G8976-C222-07

●

AT commands

Here, you can set the connection-specific initialization of the modem. The specified AT

command is output before the dial command for this number. The AT commands entered

must be specified without the

string.

●

Dial command

Displays the configured dial command.

●

Dial prefix

Displays the configured dial prefix. This can be modified.

●

Tel. number

Displays the telephone number of the destination subscriber entered in the network

configuration.

●

dialing is:

Options:

enabled

disabled

if the

enabled

option is selected, the dial-up connection is enabled. Otherwise, the dial-up

connection is disabled. This function is available only for the TIM 4R-IE.