User Manual

MCR METER Manual
7
Vm ON/OFF ：Open or close voltage monitoring function
Im ON/OFF ：Open or close current monitoring function
3.2 < BIN DISP > (MCR5010 no this feature)
This page can be set as follows:
COMP ON/OFF ：to open or close the comparison function
AUX ON/OFF ：to open or close AUX.
AUX is the main parameter is qualified, and the Deputy parameter is not qualified.
COUT ON/OFF ：to open or close the counting function
NOMINAL ：By using digital key and softkey input. (the reference value for the
comparison of the main parameters)
MODE Δ% / ABS : to choice the comparison mode.
Δ% :Relative percentage mode
ABS :Absolute value comparison mode
LOW and HIGH :Through digital key, the OK key and the softkey input.
Test result display area：DISP ON/OFF;DEV OFF/ABS/%(Same as in 3.1)
3.3 <MULTI PARA.DISP> (only MCR5200 has this function)
This page can be set as follows:
FREQ : Set frequency
LEVEL: Set test voltage
1/2/3/4/5 test parameter: The test parameters required by soft region selection.
3.4 <MEAS SETUP>
This page can be set as follows:
ResSource ：30Ω/100Ω,Select output resistance mode
AVERAGE ：1~255.By using digital key input or softkey "INCR+" and "DECR -".
RangeDwell ：Range delay. 0~6000ms.By using digital key input or softkey "INCR+" and "DECR
-".
TrigSource ：INT,EXT.(Trigger mode)
TrigDelay ：0~6000ms.By using digital key input or softkey "INCR+"
and "DECR -".
TrigEdge ：RISING,FALLING .The rising edge of the trigger; the falling
edge of the trigger
Handler ：CLEAR,HOLD,PULSE. Sorting signal mode
PulseWidth ：1~9999ms.(pulse width)
3.5 <SYSTEM SETUP>
This page can be set as follows:
Theme ：TRAD-BLUE,TRAD BLACK,BLACKISH GREEN.(Display style)
Language ：English、中文 . (Language environment)
Key Tone ：ON,OFF. Open or close button sound
ToneSour ：MASTER,EARPHONE,ALL.(Buzzer mode,EARPHONE socket is optional)
PassTone ：OFF,LONG,SHORT,TWO SHORT
FailTone ：OFF,LONG,SHORT,TWO SHORT
ParaSave ：AUTO SAVE,AUTO LOAD,NO SAVE
 AUTO SAVE : This feature will save the settings of the measurement parameters in real time,
the next boot state will be the same as the last shutdown.
 AUTO LOAD ：Automatically invokes the last loaded internal file.