User Manual

MCR METER Manual
5
2.3 Basic operation
1. Direction key: used to move the cursor.
2. Soft keys, used to change the parameters set of features.
3. Shortcut menu: MEAS, SETUP, SYSTEM, FILE, press directly into the < MEAS DISP >, < MEAS
SETUP >, < SYSTEM SETUP >, < INTER/EXT Files List> function page settings.
Reminder: when in < MEAS DISP > page, and the cursor in < MEAS DISP >, press MEAS key,
< MEAS DISP > page test results will be full screen display.
4. TOOL：Tool key，In each function page tool will be different.
When the short press TOOL key, key area will be a corresponding tool operation, short press
TOOL key again, the tools menu disappear.
When long press tool button for one second, the instrument into the key lock state, pressing
other keys invalid; again the press tool button for one second instrument will remove key
lock state.
2.4 Data storage format
USB storage, use the TOOL key in the measurement of the page, there will be data storage
function. The basic form is as follows:
<A>，<B>[，<COMP>]
A, B is the first & second parameter measurement results, scientific counting method to save.
<COMP> is the sorting result, MCR5010 has no sorting function.
COMP Explain
0 OUT
1 BIN 1
2 BIN 2
3 BIN 3
4 AUX
5 No
comparison
Chapter 3 Function description
3.1 <MEAS DISP>
The page can be set as follows:
MEAS DISP softkey ：press this key into <MEAS DISP> page.
BIN DISP softkey : press this key into <BIN DISP> page.(MCR5010 no such function)
MULTI PARA. Softkey: press this key into <MULTI PARA. DISP> page.(only MCR5200 has this
function)
Quick Clear : press this key to SHORT & OPEN all frequency points.
FUNC：MCR5010/MCR5030/MCR5100/MCR5200 can set parameters：
Cs-D，Cp-D，Ls-Q，Lp-Q，Rs-Q，Rs-D，Rp-Q，Rp-D，R-X，Zs-θ，Zs-r；
Parameter implication:
Cs: Capacitance (series equivalent mode)
Cp: Capacitance (parallel equivalent mode)
Ls: Inductance (series equivalent mode)
Lp: Inductance (parallel equivalent mode)