User Manual

MCR METER Manual
3
is in good contact. The test fixture or test cable is connected to the HD, HS, LS and LD of the front
panel of the instrument. The shield layer can be connected to the rear panel of the instrument, and
the shield layer can be connected with the rear panel of the instrument.
User homemade or other company test fixtures or test cables may result in incorrect
measurement results.
1.6 Accuracy guarantee
（1） In order to ensure the accurate measurement of the instrument, the heating time should
be no less than 15 minutes.
（2） Do not frequent switching equipment, in order to avoid confusion caused by internal
data.
（3） Correct open circuit and short circuit operation.
Chapter 2 Introdu
ction
A new generation of high precision and high stability of boutique MCR meter is MCR5010,
MCR5100,MCR5200, the 4.3 inch 480*272 TFT display screen, display classical and intuitionistic.
The series of equipment is highly applicable to the majority of manufacturers production
inspection. And the series of equipment has a variety of output impedance model can be used
for different manufacturers needs, its superior performance can be achieved business standards
and military standards of a variety of tests (such as IEC and MIL).