Specifications

8
2.3 ASSEMBLY STEPS
CHAPTER 2: KranKcycle specifications, parts and assembly steps
Attach WATER BOTTLE CAGE to CENTER UPRIGHT FRAME with 4mm ALLEN KEY
WRENCH using item 4-SOCKET HEAD CAP SCREWS.
STEP 7
Attach SEAT to UPRIGHT FRAME by securely placing SEAT HOOKS around
PROTRUDING PIN.***
!WARNING! Make sure SEAT HOOKS are fully engaged around protruding
center pin.
Insert the BOLT into the SLEEVE as shown and then apply one drop of red thread
locker to the exposed threads on the BOLT.
Using the 3mm ALLEN KEY WRENCH, align assembly into hole on the new seat frame.
Install the BOLT until the SLEEVE is flush with the frame. Tighten the bolt assembly
against the frame to secure both the BOLT and SLEEVE using the short end of the
3mm ALLEN KEY WRENCH.
***Also sold without seat.
STEP 8
ASSEMBLY COMPLETE