Service manual

ManualsBrandsMatrix ManualsExercise BikeH5X

6.1 USING ENGINEERING MODE

To enter Engineering Mode, hold the LEVEL UP and DOWN keys for 3-5 seconds until Manager Mode appears on the middle LED display.

Press the LEVEL UP or DOWN key to scroll to Engineering Mode. Press ENTER to go into Engineering Mode.

CODE DEFAULT OPTIONS DESCRIPTION

Disable Errors No Yes or No No - Shows A-C class error

codes. Yes - Shows only C class

error codes.

Speed Units Mile Mile or Kilometer Set for Mile or Kilometer.

Machine Type H5x-03 H5x, R5x, U5x, E5x-02 or E5x-03 Set the Hybrid bike as H5x.

Power Save Time 30 Seconds 30-60 Seconds Power saving time for the self

powered frame.

Pause Time 30 Seconds 15 - 120 Seconds For non self powered frames

only. Not used on this model.

Serial Number N/A N/A Serial Number input is available

for both the Console and Frame.

Use the number keys and UP

/ DOWN LEVEL keys to enter

Engineering Mode. Due to the

limited LED characters, 2 layers

are used to enter the serial

number. First Layer:

- PPPPP V

- PPPPP is the product name.

- V is the version. If the

version is A, just leave this blank.

Second Layer

- YY MM nnnnn.

- YY is the year (11, 12).

- MM is the month (e.g. 08,

09, 10).

- nnnnn is the actual serial

number.

Use the UP / DOWN LEVEL keys

to navigate the layers and the

number keys to input the serial

number. The product name is

dependent on the Machine Type

setting.

For example, the console

is EP90 with ver. B and the

manufactured date is 2011.08

with 98765. The frame is CB72

with ver. B and the manufactured

date is 2011.06 with 12345. Their

serial numbers are:

Console SN: EP90B 1rst layer,

110898765 2nd layer.

Frame SN: CB72B 1rst layer,

110612345 2nd layer.

Club ID N/A N/A This sets the club ID for clubs

using Asset Management.

Sleep Time Off Off or On (1-30 Minutes) If there is no use of the machine

over a period of time, the console

LEDs will turn off (go into sleep

mode).

Audio Source Off Off / TV / PC TV / Remote TV Manual setting that sets which

outside TV will have audio

through the console audio ports.

CHAPTER 6: ENGINEERING MODE