Specifications

CHAPTER 2: Using Manager Preference
3
2.5 USING CSAFE ON THE E5XC CONSOLE
On the back of the console
are two RJ45 receptacles. They are marked
CSAFE and ENTERTAINMENT.
Use the CSAFE port to plug in a CSAFE device using an RJ45 connector.
The connection is as follows:
CPU
UNIT 1
CSAFE
UNIT 2
ENTERTAINMENT
2.6 E5XC CONSOLE (BACK SIDE) ACCESS LAYOUT:
Below is a layout to all of the access ports on the back of your Matrix Console.
2.4 USING MANAGER MODE ON E5XC
Your MATRIX Elliptical Total Body Cross Trainer is designed to allow you to
cutomize settings for your preferences and diagnostics. The Manager Mode
can only be accessed while the Elliptical is powered up. Follow the instruc-
tions to adjust the Elliptical Total Body Cross Trainer computer for your desired
setting.
STEP 1: Power up the Elliptical Total Body Cross Trainer and hold the UP
and DOWN arrow keys for 3 seconds. The word ‘Manager’ will
appear in the alphanumeric window and will enter into the
Manager Setting automatically after 3 seconds.
Continue to pedal until finished.
STEP 2
: Select information you would like to view or change from the follow
ing list by using the UP or DOWN arrows. Press SELECT.
Manger mode will allow you to view and set the following.
STEP 3: Use UP or DOWN arrows to increase or decrease values.
STEP 4: Press
START to save and enter selected values and exit to STEP 2.
STEP 5: Exit by pressing START. Screen will reset to Start up.
DISPLAY
Manager
CODE: INFORMATION
P0: Maximum program time
P1: Default time
P2: Default level
P3: Default weight
P4: Speed
P5: Machine
P6: Cardio Entertainment
P7: Accumulated Distance
P8: Accumulated Time
P9: Software Version
DEFAULT VALUE
95 min
20 min
L1
150 lbs
Miles
BI
On
On
MIN.
5
5
L1
80lbs
Miles
BI
On
On
MAX.
95
95
L20
400lbs
KM
RE,EL
OFF
OFF
USER DEFINABLE
Y
Y
Y
Y
Y
Y
Y
Y
CSA FE
ENT ERTAI NMEN T
REPROGRAMMING
CONNECTOR
BATTE RY
LOCATION
CSAFE
PORT
ENTERTAIN MEN T
PORT