Specifications

2.1 USING MANAGER MODE ON E5X
Your MATRIX Elliptical Total Body Cross Trainer is designed to allow you to
cutomize settings for your preferences and diagnostics. The Manager Mode can
only be accessed while the Elliptical is powered up. Follow the instructions to
adjust the Elliptical Total Body Cross Trainer computer for your desired setting.
STEP 1
: Power up the Elliptical Total Body Cross Trainer and hold the
UP and DOWN arrow keys for 3 seconds. The word ‘Manager’
will appear in the alphanumeric window and will enter into
the Manager Setting automatically after 3 seconds.
Continue to pedal until finished.
STEP 2
: Select information you would like to view or change from the
following list by using the UP or DOWN arrows. Press SELECT.
Manger mode will allow you to view and set the following.
CHAPTER 2: Using Manager Preference
STEP 3: Use UP or DOWN arrows to increase or decrease values.
STEP 4: Press START to save and enter selected values and exit to STEP 2.
STEP 5: Exit by pressing START. Screen will reset to Start up.
DISPLAY
Manager
CODE: INFORMATION
P0: Maximum program time
P1: Default time
P2: Default level
P3: Default weight
P4: Speed
P5: Machine
P6: Cardio Entertainment
P7: Accumulated Distance
P8: Accumulated Time
P9: Software Version
DEFAULT VALUE
95 min
20 min
L1
150 lbs
Miles
BI
On
On
MIN.
5
5
L1
80lbs
Miles
BI
On
On
MAX.
95
95
L20
400lbs
KM
RE,EL
OFF
OFF
USER DEFINABLE
Y
Y
Y
Y
Y
Y
Y
Y
2.2 USING CSAFE ON THE E5X CONSOLE
On the back of the console are two RJ45 receptacles. They are marked
CSAFE and ENTERTAINMENT.
Use the CSAFE port to plug in a CSAFE device using an RJ45 connector.
The connection is as follows:
2
2.3 E5X CONSOLE (BACK SIDE) ACCESS LAYOUT:
Below is a layout to all of the access ports on the back of your Matrix Console.
CPU
UNIT 1
CSAFE
UNIT 2
CSAFE
UNIT 3
ENTERTAINMENT
* THERE ARE THREE RECEPTICLES ON THE E5X CONSOLE ONLY