Manualshelf

Owner`s manual

ManualsBrandsMatrix ManualsFitness EquipmentElliptical Total Body
21222324252627282930
4948
MANAGER MODE AND ENGINEERING MODE
3X AND 5X CONSOLES:
These sections allow users to manipulate default settings for the machines. It may be accessed by pressing the Level Up/
Level Down keys simultaneously for 5 seconds. To change a setting, press “Enter” on the keypad under ‘Manager Mode’
or ‘Engineering Mode’ and use the incline or level buttons and numeric keypad to enter a category and change the values.
Pressing “Enter” again will save the change. Pressing “Back” or “Stop” will bring you to the previous menu. To exit Manager or
Engineering Mode, hold “Stop” down for 5 seconds. Below is a list of the settings that can be changed.
MANAGER MODE SETTINGS: ENGINEERING MODE SETTINGS:
Default Time
Default Level
Default Incline (Ascent Trainer)
Default Age
Default Weight
Accumulated Distance
Accumulated Time
Incline Reset (Ascent Trainer)
Software Version
Speed/Distance Mode
Out of Order
Gender
Sound Mode
Maximum Time
Language
Disable Errors
Speed Units
Machine Type
Power Save Time
Pause Time
Serial Number
Incline Tuner (Ascent
Trainer)
Club ID
ErP Time
Am System
Audio Source
Volume control
7XE AND 7XI CONSOLES:
These sections allow users to manipulate default settings for the machines. Manager Mode may be accessed by pressing
ENTER, 1, 0, 0, 1, Enter on the keypad. Engineering Mode may be accessed by pressing ENTER, 2, 0, 0, 1, Enter on the
keypad. The screen shots on the next page show what you will see when you enter Manager Mode and Engineering Mode.
This console has a fully integrated touch screen display. Lightly touch the screen and use the intuitive interface to adjust
the settings. Any and all changes made will be saved when the “home” button is touched in the upper left-hand corner of
the screen. Touching the “home” button will exit manager or engineering mode and return you to the main screen. It is not
necessary to touch this button after each setting is changed.
7XE - MANAGER AND ENGINEERING MODE 7XI - MANAGER AND ENGINEERING MODE
MX14_AEALB3x_5x_7xe_7xi_OM_Rev1_1.indd 48-49 6/4/14 11:24 AM