Specifications

4
The Matrix E7x-01 Elliptical Trainer can operate without power;
however, the machine must boot the software with each new user.
This can mean a delay of up to 35 seconds while the machine's
operating system prepares for a workout. It's similar to turning your
cell phone on for the first time of the day. These units can also be
AC powered. This will power the console at all times and requires no
minimum RPM for operation. A powered product lowers the starting
resistance and is easier to use for beginners. These units can be
daisy chained together, up to 4 units per dedicated 15 amp circuit,
using a Matrix daisy chain cord adapter (sold separately).
For your safety and for the performance of your Matrix Elliptical
Trainer, the ground on your circuits must be non looped. Please refer
to NEC articles 210-21 and 210-23. Any alterations to the standard
Matrix power cords will void all warranties.
GROUNDING INSTRUCTIONS:
The Matrix E7x-01 Elliptical Trainer must be grounded. If it should
malfunction or break down, grounding provides a path of least
resistance for electric current to reduce the risk of electric shock.
The Elliptical Trainer is equipped with a cord having an equipment
grounding conductor and a grounding plug. The plug must be
plugged into an appropriate outlet that is properly installed and
grounded in accordance with all local codes and ordinances. If the
user does not follow these grounding instructions, the user could
void the Matrix limited warranty.
DANGER: Improper connection of the equipment grounding
conductor can result in the risk of electric shock. Check with a
qualified electrician if the user is in doubt as to whether the product
is properly grounded. Do not modify the plug provided with the
product if it will not fit the outlet, have a proper outlet installed by an
electrician
CHAPTER 2: IMPORTANT SAFETY INSTRUCTIONS
2.2 ELECTRICAL REQUIREMENTS