User manual

User Manual for Matrix Maker
Page 4
On the final screen of the installation, you will be given the option to install the PS/2
driver*, view the user manual, and/or run the Matrix Maker application. Please make
sure to check the appropriate boxes and click ‘Finish’.
[NOTE: The PS/2 driver is required for Windows 2000 and Windows XP users with a
PS/2 keyboard and/or MSR card reader. If you do not wish to install this driver during
the Matrix Maker setup you may do so at a later time. For instructions on how to
install the driver at a later time, please refer to the file POSKB_DRV_SETUP.pdf which is
located in the default installation directory.]
[NOTE: If you are using an operating system other than Windows 2000 or Windows XP,
please do not install the PS/2 driver as it is not compatible with these operating
systems.]
II. PS/2 Keyboard and MSR Card Reader Driver Setup
This section applies to Windows 2000 and Windows XP® users who have a PS/2
keyboard and/or MSR card reader. For more detailed instructions, please refer to the
file POSKB_DRV_SETUP.pdf which is located in the default installation folder.