User manual

User Manual for Matrix Maker
Page 24
Figure 2: MICR Settings graphical interface
It is very important to note that the MICR Setting window opens with default selections;
select “Retrieve Keyboard” from the “Keyboard” pull-down menu in the Matrix Maker
window (Figure 1) to retrieve the actual configuration of the MICR reader.
Note the “Update” and “OK” buttons located at the bottom right-hand corner of the MICR
Setting window. Click “OK” to exit without updating the configuration of the MICR reader -
even if changes were made. Click ‘Update” to download the configuration shown in the
MICR Settings window to the MICR reader’s non-volatile memory.
After clicking the “Update” button, a transient window will briefly appear briefly instructing
you not to move your mouse until the download is complete. This window will
automatically disappear and be replaced with one stating “Finish updating MICR”. Click
“OK” in this window to return to the Matrix Maker window.