User manual

User Manual for Matrix Maker
Page 23
3. Navigating to the MICR Setting Window
The first step to configuring the MICR reader is to run the Matrix Maker software, select the
interface (PS/2, USB or RS232), the model of your keyboard (from the “Available Product”
window, your “Country Code” and then click “OK”. A window should open up similar to the
one shown in Figure 1 below. Keep in mind that the layout shown is for a TG136MC-MP
and is shown for example purposes; the look of the key matrix portion will be different if you
have a different model number.
Figure 1: Matrix Maker window showing the MICR icon
Click the “MICR” icon in the tool bar to launch the graphical interface for configuring the
MICR reader. The graphical interface shown in Figure 2 should appear.