User manual

User Manual for Matrix Maker
Page 20
11. Save
To save all current settings in the Matrix Maker program memory to a file, click File
> Save on the menu bar (or click the icon on the toolbar).
12. Open
To open a saved Matrix Maker settings file, click File > Open on the menu bar (or
click the icon on the toolbar). [NOTE: An error will occur if you choose a
settings file for keyboard model other than the currently selected model.]
13. Default Keymap
You can set the default key mappings for each model in the Matrix Maker by
clicking File > Set Default on the menu bar. Once a key mapping is set as default,
it will be automatically loaded the next time this model is selected.
IV. Batch Update
You can update the keymap or the firmware automatically by creating a batch file. After
updating, the program will be closed automatically.
1. Keymap Update
The syntax of the batch file for updating the key mapping of a PS2 or USB device:
“Location_of_Executable_File ” -1“Location_of_Keymap_File” -t“Category”
Example:
“C:\Program Files\Matrix Maker\Programmable Keyboard\MatrixMaker.exe”
-1“C:\temp\s78a.dat” -t“S78A”