User manual

User Manual for Matrix Maker
Page 17
3. Reverse reading
Track data will be read from right to left instead of left to right (default). It may
be suitable for some languages such as Hebrew.
4. Output data for any valid track
If there is an invalid track in the card, this option will display the remaining
valid tracks.
5. Output credit card A/C No.
Displays the credit card A/C No. (track 2 only).
6. Enable LRC
Displays the LRC after the end sentinel for each track.
7. Shown in digital format
If checked, the LRC will be displayed in the 2-byte digital format. If it is
unchecked, the LRC will be displayed in the character format. For example, if
the LRC in Track 1 is 0x31, it will display “31” when it is checked and it will
display “Q” when it is unchecked.
Note:
1. The code length for header, separator, and suffix is limited to 16 characters.
2. For some PS/2 and USB devices, each sentinel length is limited to 16
characters. You can use \n to represent the new line character in each
sentinel.
According to the settings in the above dialogue window, after you slide a magstripe
card along the reader, it will output the following information in order:
Header codes, Track 1 Start Sentinel, Track 1 Data, Track 1 End Sentinel, Separator
codes, Track 2 Start Sentinel, Track 2 Data, Track 2 End Sentinel, Separator codes,
Track 3 Start Sentinel, Track 3 Data, Track 3 End Sentinel, Suffix codes.
After editing the settings you may click the ‘Update’ button to send them directly to
the keyboard or you may click ‘OK’ to save the settings in the program memory
(settings will not be transferred to the keyboard until you click the ‘Update Key
Mapping’ button – see section 8 for more information).