User manual

User Manual for Matrix Maker
Page 15
3. Keyboard Setting
On the menu bar, click Keyboard > Keyboard Settings. The following dialogue
window will appear:
If you would like the keyboard to perform the auto-repeat function built into your
PC’s operating system, please check the ‘Repeat Enable’ box. If this is not
selected the code associated with each key will only be output once even while
holding down a key. [NOTE: Choosing ‘Repeat Enable’ and assigning a non-layer
index key code setting for any of the key lock positions (if available) will cause
those key code settings to be output repeatedly. We recommend only setting the
key lock positions to layer indexes for this reason.]
To make the keyboard beep upon pressing a key, please check the ‘Beep Enable’
box. You may then select if you would like all keys to beep or only programmed
keys to beep when pressed down.
Depending on what model keyboard is selected, you may be able to assign a
country code in the keyboard setting. This country code will affect the MSR card
reader (if available) and the keys programmed using the ASCII code method.
[NOTE: To display the mapping correctly on your PC, you should choose the
Country Code in the Keyboard Setting dialogue window compatible with your OS
language.]