Specifications

7
6.6 RS-232 and Telnet Commands
Command Description
A1~A8 Switch Output A to 1~8
B1~B8 Switch Output B to 1~8
C1~C8 Switch Output C to 1~8
D1~D8 Switch Output D to 1~8
E1~E8 Switch Output E to 1~8
F1~F8 Switch Output F to 1~8
G1~G8 Switch Output G to 1~8
H1~H8 Switch Output H to 1~8
ABCD...1~ABCD...8 Switch Output A B C D... to 1~8 at the
same time
SETIP <IP> <SubNet> <GW> Setting IP. SubNet. GateWay (Static IP)
RSTIP IP Conguration Was Reset To Factory
Defaults <DHCP>
IPCONFIG Display the current IP cong
P0 Power OFF
P1 Power ON
I1~I8 Switch all the Output to 1~8
ST Display the current matrix status and F/
W version
RS System Reset to A1, B2, C3, D4, E5, F6,
G7, H8
EM Setting EDID MODE. 1-STD 2-TV
? Display all the available commands
Quit Exit(for telnet only)
Note: Any commands will not be executed unless followed by a
carriage return. Commands are case insensitive.