Owner`s manual

26 27
MANAGER PREFERENCE MODE
FOR 5X CONSOLES:
This section allows a user to manipulate default settings for the machines. It may be accessed by pressing the Level Up/Level
Down keys simultaneously for 5 seconds. To change a setting, press “Enter” on the keypad and use the Level buttons and numeric
keypad to change the values. Pressing “Enter” again will save the change. Pressing “Back” will bring you to the previous menu. To
exit manager’s mode, hold “Stop” down for 5 seconds.
FOR 7X & 7XE CONSOLES:
This section allows a user to manipulate default settings for the machines. It may be accessed by pressing “ENTER”, 1, 0, 0, 1,
“Enter”. To change a setting, press “Enter” on the keypad and use the Level buttons and numeric keypad to change the values.
Pressing “Enter” again will save the change. Pressing “Back” will bring you to the previous menu. To exit manager’s mode, press the
“Home” key. Below is a list of the settings.
Serial Number
Floors Climbed
Accumulated Time
Software Versions
Out of Order
CSafe Model
Maximum Time
Default Time
Pause Time
Adjust Resistance Offset
Default Demand Floors
Default Target Calories
Default Level
CONSOLE DESCRIPTION:
The Matrix machine is inspected before it is packaged. It is shipped in three pieces: the base,
the handlebars and the console. Carefully unpack the unit and dispose of the box material.
Default Age
Default Weight
Default Height
Gender
Key Sound
Default Channel
Default Volume
Tuner Available
Setup
Languages
Asset Management
Virtual Active
E-Stop
climber_om_r1.7.indd 26-27 9/30/11 12:01 PM