User manual

CONFIGURATION SYSTEM SETTINGS
MATRIX BACnet Router User Manual (6/6/2007) 3-15
3.7.3 SYSTEM PASSWORD
System Password provides a method to change system credentials, required to access the web user
interface. Refer to the inside housing sticker for information on default credentials.
Figure 3-10 Matrix Router System Password
To change the system password, you will be required to enter:
! The case-sensitive old password
! The case-sensitive new password
! Re-enter the case-sensitive new password for verification
System passwords can be made up of any printable characters, containing characters from each of the
following three groups as displayed in Table 3-5. Passwords must be at least 6 characters in length. It is
recommended that users implement “strong” passwords consisting of characters from all three groups
listed below.
Table 3-5: Valid System Password Character Groups
Group Examples
Letters (uppercase and lowercase) ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
Numbers 0 1 2 3 4 5 6 7 8 9
Symbols (all characters not defined
as letters or numbers)
underscore ( _ )
hyphen ( - )
period ( . )