User manual

PRODUCT OVERVIEW QUICK START - MATRIX ROUTER SETUP

MATRIX BACnet Router User Manual (6/6/2007) 1-9

1.5 QUICK START - MATRIX ROUTER SETUP

Use the quick-start to learn the order of tasks to perform when you configure MATRIX Router. The

following table lists references where you can go to get additional information.

Table 1-2: Quick Start Setup Information for MATRIX Router

Task In This Document In Other Documents

1 Determine the MATRIX Router

Device Instance, network numbers,

MAC Address (Unit ID), and baud

rate for the MS/TP network.

n/a

Site Engineering

Documentation

2 Mount the MATRIX Router hardware. Mounting - Page 2-4 n/a

3 Connect power to MATRIX Router

and verify it is operating correctly.

Power Requirement - Page 2-5 n/a

4 Configure your PC’s network card

settings

Configuring your Computer - Page 3-3 PC Documentation

Windows On-Line Help

5 Connect to MATRIX Router with web

browsing software and login.

6 Configure Ethernet Settings. Ethernet Settings - Page 3-12 n/a

7 Configure EIA-485 (MS/TP) Settings. EIA-485 Network - Page 3-6 n/a

8 Configure BACnet Router Settings. BACnet - Page 3-8 n/a

10 Configure BBMD Settings BBMD - Page 3-20 n/a

11 Configure Time/Date Settings Time/Date Settings - Page 3-16 n/a

12 Connect MATRIX Router to BACnet

networks as necessary.

Communication Connection - Page 2-6 n/a

13 Perform a system backup of MATRIX

Router

Backup - Page 3-17 n/a

14 OPTIONAL - Use Auto-Pilot BACnet

to verify that MATRIX Router is

communicating and routing correctly

n/a Auto-Pilot User Manual

Auto-Pilot BACnet Driver

User Manual