Installation Guide

SAHARA
COOLABAH
REEDED SQUARE
LATTICE
CLASSIC DIAMOND
LATTICE
• 15 year structural warranty
• Made in Australia
• Will not swell, rot or rust
• Never needs painting
• No harmful chemicals
• Impervious to insects
www.designow.com.au
MATRIX
Décor Screen
PRODUCT RANGE
INSTALLATION OPTIONS
Made in
Australia
from 100%
Recycled Plastic
Matrix Décor Screens
Matrix Décor Screens offer the perfect blend of contemporary styling, durability and low maintenance. The
|versatility and style of these screens allows for installation both indoors and outdoors, in formal and informal
settings.
Matrix Décor Screens are suited to all climatic conditions and will never rot, rust, swell or leach out their colour.
These screens are not affected by continuous exposure to moist, salty air and will not stain wall or paving.
Fade resistant materials are used to ensure that Matrix Decor Screens will never need painting. Painting is not
recommended as conventional paints will not adhere to Matrix Decor Screens.
Attractive designs of Matrix Décor Screens allow an artistic installation suited to residential and commercial
properties. All Matrix Décor Screens can be further enhanced with background or recessed lighting.
Bring the garden inside, enhance your courtyard, or disguise an existing feature or unwanted view with Matrix
Décor Screens.
Features
• Available in 8 attractive contemporary designs
• Made in Australia from 100% recycled plastic
• Will not rot, rust or need painting
• Do not contain harmful chemicals
• Resistant to mould and insects
• Covered by a 15 year structural warranty
Matrix Decor Screens can be installed using several simple methods. Our recommended method is using one
Matrix C-Channel Frame Kit per panel.
Matrix C-Channel Frame Kits are available at Bunnings in colours that match Matrix Decor Screens. If the size of
the panel has to be reduced to t the available space, cut the same amount off the panel and off the frame pieces
to ensure that they t together.
All Matrix Decor Screens shown here are available only at most Bunnings Australian stores.
Only Woodland, Orbit, Jungle and Tangle screens are available at Bunnings New Zealand stores.
THERMAL EXPANSION AND CONTRACTION
All plastic products will expand and contract with changes in temperature. If no allowance is made for thermal
expansion and contraction during installation, this may cause damage to the product and void the warranty. The
gures below show approximate panel size variation due to temperature changes:
At 0ºC 1794 x 897mm
At 20ºC 1800 x 900mm
At 40ºC 1806 x 903mm
Expansion Gap: 12mm 6mm
(Required expansion gap per sheet)
Detailed instructions are available on our website: www.designow.com.au
NOTE: These products are not approved for use as pool fencing.
Matrix Lattice
Matrix Lattice is the smart and durable alternative to timber lattice. Easy to cut and shape, it is a simple way to create
a long-lasting, maintenance-free lattice feature. Matrix Lattice is manufactured from UV-stabilised polypropylene,
one of the most durable polymers, which will ensure years of maintenance free outdoor life.
Fade resistant materials are used to ensure that Matrix Lattice will never need painting.
Matrix Classic Diamond Lattice is suitable for a multitude of applications including:
Fencing Shade Areas Enclosures
Front fences Pergolas Balustrading
Fence tops Shade houses Patios
Gates Verandahs Decks
Privacy screens Porches Spas and pools
Yard dividers Play areas Utility areas
Features
• Never needs painting
• Made in Australia from 100% recycled plastic
• Will not rot, rust or mildew
• Will not separate
• Resistant to mould and insects
• Easy to cut and install
• Impact resistant
• Covered by a 15 year structural warranty
Matrix Lattice can be installed using several simple methods. Our recommended method is using one Matrix
C-Channel Frame Kit per panel.
Matrix C-Channel Frame Kits are available at Bunnings in colours that match Matrix Lattice. If the size of the panel
has to be reduced to t the available space, cut the same amount off the panel and off the frame pieces to ensure
that they t together.
HALOORBIT RIVERBANK
JUNGLE WOODLAND TANGLE
The abstract design of the RIVERBANK
screen conjures scattered pebbles by the
water’s edge. It lets through a dappled light
while providing additional privacy.
Colour: Charcoal
Size: 1800x900x7mm
Block Out: 63%
The striking forest silhouettes of the
WOODLAND screen bring a creative touch
to any setting while still allowing through
plenty of light. It makes for a beautiful
garden partition or an eye-catching piece of
wall art for inside the home.
Colour: Charcoal
Size: 1800x900x7mm
Block Out: 58%
The JUNGLE screen lives up to its name with
an arresting leaf design. It complements its
surroundings outdoors and adds a point of
contrast indoors.
Colour: Charcoal
Size: 1800x900x7mm
Block Out: 58%
The attractive leafy design of the TANGLE
screen makes it an ideal choice for installation
in the garden. The delicate detailing gives it a
classic feel.
Colour: Charcoal
Size: 1800x900x7mm
Block Out: 70%
The intricate patterning of the ORBIT screen
is reminiscent of Moroccan tiles. It provides
substantial coverage for added privacy and
looks stunning when wall-mounted.
Colour: Charcoal
Size: 1800x900x7mm
Block Out: 71%
The geometric circle pattern of the HALO
screen has a contemporary edge with an
Eastern feel. It looks great on its own and
stunning when used in multiple to divide a
larger space or cover a wall.
Colour: Charcoal
Size: 1800x900x7mm
Block Out: 52%
The SAHARA screen concept has been inuenced by
the traditional North African and Asian screen styles. It
is ideal for creating an attractive partition stat still allows
sunlight and fresh breeze to pass through.
Colour: Charcoal
Size: 2410x1205x7mm
Block Out: 60%
The COOLABAH is a new screen concept which is formed
by four layers of overlapping gum leaves, resulting in a
realistic 3-dimensional effect. It is the ultimate in screen
design, with ne detailing on the leaves. The random
overlapping layout offers excellent privacy.
Colour: Rivergum & Stone
Size: 2410x1205x7mm
Block Out: 74%
Matrix Reeded Square Lattice is perfect
for supporting climbing plants, permanent
and temporary fencing, gates, decoration
or as a divider between spaces.
Colour: Smooth Cream
Size: 1800x900x7mm
Block Out: 51%
Matrix Classic Diamond Lattice has timeless visual
appeal and the highest level of privacy without inhibiting
your sense of space. It is perfect for screening, shade,
verandahs, car ports, covering up unsightly utilities or
as a divider between areas. It is easy to cut and can
be bent into a curve without breaking.
Colour: Smooth Cream & Slate Grey
Size: 2410x1205x7mm
Block Out: 78%
Lattice & Screen Installation
VERSATILE IN APPLICATION... EASY TO INSTALL
Whatever your application, there is a simple installation method to provide the exibility and ease of installation you
need to create your outdoor masterpiece.
Installation in a at (ceiling) position is not recommended and any resulting distortion will not be covered by the
warranty.
FIXING METHODS
Installing Matrix Lattice and Decor Screens using one of our recommended methods will ensure a professional and
durable nish.
Note: Our 15 year Warranty only applies when the panel has been installed in accordance with our installation
instructions.
Detailed installation instructions are provided with each kit and can be downloaded from www.designow.com.au;
these instructions must be carefully followed in accordance with the Warranty conditions.
We also offer galvanised and powder coated steel posts and rails, and plastic post caps in matching or contrasting
colours.
INSTALLATION OPTIONS
There are several simple installation options that will ensure a professional and durable nish:
• Using a Matrix galvanised and powder coated C-channel frame kit produces a very professional and secure
installation.
• Using screws and washers – screw holes in the panel must be 12mm larger than the screws to allow for
expansion and contraction with changes in temperature.
• Within a timber frame with grooved timbers or beading. Use 30mm minimum groove depth and allow at
least 12mm for vertical and 6mm for horizontal thermal expansion.
Using spacers to set the screen panel off the wall or fence will create a more 3-dimensional installation with shadow
effects. Backlighting can be used to further enhance this effect.
MATRIX C-CHANNEL FRAME KIT
The Matrix C-Channel Frame Kit is designed especially for Matrix Screens and Lattice. It allows
you to attach the panel between or in front of vertical or horizontal supports, or to the inside of a
frame. The kit makes installation easy, attractive and secure, while allowing the panel to expand and
contract with changes in temperature.
Use a Matrix C-Channel Frame Kit for securing Matrix Lattice and Screens:
• To the inside of a frame
• To the face of a frame, posts or rails
• Spanning between posts or rails
A Matrix C-Channel Frame Kit is designed to t around a full lattice or screen panel 2410x1205mm
or 1800x900mm.
Each kit consists of the following components:
- 2x long C-channels
- 2x short C-channels
- 4 x plastic corners
- 10x galvanised steel at mounting brackets
- 10x 22mm long x 3mm diameter galvanised steel pins
(for securing the panel within the C-channel)
NOTE: Mounting screws are not included in the kit.
6mm
14mm
6mm
14mm
OVERSIZED HOLE
WITH TEK SCREW
OVERSIZED HOLE
WITH PAN HEAD SCREW
Routing Timber
This option can only be used if timber is routed before the frame is assembled.
• Rout an slot in the timber frame. 8mm wide The slot has to be 20mm deep in the base timber
to retain the lattice and 20mm deep along each side. At the top, the slot has to be 30mm
deep. This is so that there is enough room for the lattice to expand and contract.
• When the sheet is installed in the frame, there should be 6mm movement in the width of the
sheet and 12mm in the length for expansion and contraction.
Note: For best results paint or stain the timber before the panel is installed.
If the panel buckles in the heat, you have not allowed enough gap for expansion.
Mounting Directly Using Screws
The following steps must be followed when direct xing Matrix Lattice and Screens.
• To mount the panel using screws (with washers if required), holes should be positioned in locations as close as
practical to the diagram at right.
• Holes should be drilled at least 6mm larger than the screw thread to allow for expansion..
• If required, use washers to cover the holes.
• Make sure that each screw is in the centre of each attachment hole.
• Do not overtighten screws to allow the panel to expand and contract with changes in temperature.
• If tting multiple sheets, you must leave a space of 6mm between sheets for expansion along each long edge and
12mm along each short edge.
• If the screen buckles in the heat, this means that the screws are too tight; release them slightly to allow some
movement. If the screen still buckles, check that screws are centred and reposition if required.
• For a neater installation paint the screw heads or purchase colour coded hex head fasteners.
Timber Frame
The screen can be mounted using a timber frame with beading.
• Ensure that there is plenty of room for thermal expansion - you must leave a space of 6mm along the long edge
and 12mm along the short edge
• Use timber beading at least 30mm in depth to retain the screen.
• Nail or screw the bead in place to make a back support for the screen, then position the screen in the frame and
t the bead to hold the screen in place.
• Ensure that the frame is strong enough to withstand the additional weight and wind loading.
Note: For best result paint all the timber components before assembly.
BEAD
BEAD
SCREEN
TIMBER FRAME
TIMBER FRAME
EXPANSION GAP
Diamond Clips (available through special orders) can be used on
their own or in conjunction with Matrix C-Channel Frame Kits and
will hold the lattice securely in place against any existing structure
(e.g. posts or rails, a fence or a building) while allowing it to expand
and contract with changes in temperature.
OVERSIZED HOLE WITH SCREW
POSITIONED AT TOP OF HOLE
RECOMMENDED
SCREW OR HOOK
POSITIONS
M
A
D
E
F
R
O
M
R
E
C
Y
C
L
E
D
P
L
A
S
T
I
C
M
A
D
E
F
R
O
M
R
E
C
Y
C
L
E
D
P
L
A
S
T
I
C
5
ORBIT
HALO RIVERBANK
JUNGLE
WOODLAND TANGLE
STYLES AVAILABLE
8 Silkwood Rise Carrum Downs Vic 3201 Australia
Tel: [phone] Fax: [phone]
Email: sales@designow.com.au