Specifications

CHAPTER 4: Programming & engineering mode
4.1 USING MANAGER MODE
• To enter manager mode, hold the UP and DOWN level keys for three
seconds until “MANAGER” appears on the middle LED display.
•
Press the UP and DOWN elevation keys to scroll between program screens.
• Press SELECT to modify program setting.
• Press UP or DOWN level keys to change value.
• Press QUICK START to save setting.
• Press QUICK START again to exit manager mode.
(example changing default time from 20:00 - 30:00 minutes).
3.8 CONSTANT WATTS
Resistance level is set by the user and constantly changes to reflect stride
speed. As stride speed (SPM) increases, resistance decreases while output
wattage stays the same. In turn, if stride speed decreases then resistance
increases.
STEP 1: Select WATTS by using the UP or DOWN arrow keys.
Press
SELECT or wait 5 seconds.
Selecting START will start program.
STEP 2: Select TIME by using the UP or DOWN arrow keys.
Press SELECT or wait 5 seconds.
Selecting START will start program.
STEP 3: Select WEIGHT by using the UP or DOWN arrow keys.
Press START or SELECT to begin workout.
Display, Starting 3, Starting 2, Starting 1.
CHAPTER 3: Using the console
QUICKSTAR T