Owner`s manual

4
CSA FE
ENT ERTAIN MENT
REP R OGR A MMI N G
CON N ECT O R
BAT TERY
LOC ATION
CSA F E
PORT
ENT E RTAI NMEN T
PORT
MIN.
5
5
L1
60lbs
Miles
BI
On
On
CHAPTER 3: U
sing manager preference
3.1 USING MANAGER PREFERENCE MODE
Your Matrix Elliptical is designed to allow you to customize settings for your
preferences and diagnostics. The Manager Mode can only be accessed while
the Elliptical is powered up. Follow the instructions to adjust the Elliptical
computer to your desired setting.
STEP 1: Power up the Elliptical and hold the UP and DOWN ARROW KEYS
for 3 seconds. The word “Manager” will appear in the
alphanumeric window and will enter into the Manager setting
automatically after 3 seconds. Continue to pedal until finished.
STEP 2: Select information you would like to view or change from the
following list by using the UP or DOWN ARROWS. Press SELECT.
Manager mode will allow you to view and set the following:
STEP 3: Use UP or DOWN ARROWS to increase or decrease values.
STEP 4: Press START to save and enter selected values and exit to STEP 2.
STEP 5: Exit by pressing START. Screen will reset to start up.
3.2 USING CSAFE
Matrix is the leader in entertainment availability. On the back of the console
are two RJ45 receptacles. They are marked CSAFE and ENTERTAINMENT.
Use the CSAFE port to plug in a CSAFE device using an RJ45 connector.
The connection is as follows:
3.3 USING (BACK SIDE) ACCESS LAYOUT:
Below is a layout to all of the access ports on the back of your Matrix
Console.
A3x_E3xc_rev1.7.indd 4 8/6/10 2:33 PM