Owner`s manual

1
1.1 BEFORE GETTING STARTED
It is the sole responsibility of the purchaser of Matrix Fitness Systems
products to instruct all individuals, whether they are the end user or
supervising personnel, on proper usage of the equipment.
It is recommended that all users of Matrix Fitness Systems exercise
equipment be informed of the following information prior to its use.
1.2 PROPER USAGE
Do not use the equipment in any way other than designed or intended by
the manufacturer. It is imperative that all Matrix Fitness Systems
equipment is used properly to avoid injury.
Keep hands and feet clear of moving parts at all times to avoid injury.
Unsupervised children must be kept away from this equipment.
Do not wear loose clothing while on equipment.
READ AND SAVE
THESE INSTRUCTIONS
This elliptical is intended for commercial use. To ensure your safety and
protect the equipment, read all instructions before operating the MATRIX
elliptical.
When using an electrical product, basic precautions should always be
followed including the following:
DANGER: To reduce the risk of electric shock: Always unplug
this equipment from the electrical outlet immediately after using and
before cleaning.
WARNING: To reduce the risk of burns, fire, electrical shock or
injury to persons that may be associated with using this product.
An appliance should never be left unattended when plugged in. Unplug
from outlet when not in use and before putting on or taking off parts.
This product must be used for its intended purpose described in this
lower case owner’s manual. Do not use other attachments that are not
recommend by the manufacturer. Attachments may cause injury.
To prevent electrical shock, never drop or insert any object into
any opening
Do not remove the console covers. Service should only be done by an
authorized service technician.
Never operate the elliptical with the air opening blocked. Keep the air
opening clean, free of lint and hair.
Never operate product if it has a damaged cord or plug, if it is working
properly, if it has been damaged, or immersed in water. Return the unit to
a service center for examination and repair.
Do not carry this unit by it’s supply cord or use the cord as a handle.
•
•
•
•
Keep any power cord away from heated surfaces.
Close supervision is necessary when elliptical is used by or near children
or disable persons.
Do not use outdoors
Do not operate where aerosol (spray) products are being used or when
oxygen is being administered.
To disconnect, turn all controls to the off position, then remove plug from
outlet.
Connect this elliptical to a properly grounded outlet only.
This unit is not equipped with a free wheel. Pedal speed should be reduced in
a controlled manner.
Care should be used when mounting or dismounting the equipment. Before
mounting or dismounting move the pedal on the mounting or dismounting side
to its lowest position and bring the machine to a complete stop.
CAUTION: If you experience chest pain, nausea, dizziness or
shortness of breath, STOP exercising immediately and consult a physician
before continuing.
•
•
•
•
•
•
•
CHAPTER 1: I
mportant
S
afety
I
nstructions
1.3
•
•
•
•
•
•
•
•
1.4 ELECTRICAL REQUIREMENTS
The Matrix Elliptical is designed to be self-contained and does not require
an external power supply to operate.
The battery needs to be charged for 3-4 hours when first installed. Until
the battery is fully charged, the 30 second pause feature may not function
fully. The charging does not need to be continuous for 3-4 hours, but over
combined workouts equaling 3-4 hours.
The Ascent Trainer does require an external AC power source.
For your safety and Ascent performance, the ground on this circuit must
be non-looped. Please refer to NEC article 210-21 and 210-23. The Ascent
Trainer is provided with a power cord with a plug listed below and requires
the listed outlet. Any alterations of this power cord could void all warranties
of this product. Multiple Ascent trainers can be powered on one dedicated
circuit. (3 units per 15 Amp and 4 units per 20 Amp dedicated circuit.)
120 NEMA 5-20R
120 NEMA 5-20R
220 NEMA 6-20R 220 NEMA 6-20R
A3x_E3xc_rev1.7.indd 1 8/6/10 2:33 PM